[ 17Lf Servo Series ] - 50mm(1.97in) stroke
Regular price
$234.00
17Lf Servo Series Features
- Compact size with built-in drive, position sensor, DC motor and gear box
- Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor
- Position, current and speed control along with position & current feedback
- Easy digital I/O control through expansion I/O port (No coding)
- Action feature which enables user's motion save & run
- 27/37/50/87mm(*) stroke option
(*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software. - Rated load of 17N~70N depending on the lead angle for each stroke
- Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed. - RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided)
17Lf Servo Series Specifications
Rated Load |
Stroke | Communication | Rated Load / Max Speed(No Load) |
Stall Force at Current (1.6A / 800mA / 200mA) |
Mechanical Self Lock (Z Axis Use) |
Lead Screw / Gear Ratio / Gear Type |
RS-485 | ||||||
17N | 37mm (40mm*) | 17Lf-17F-37 | 17N / 105mm/s | 90N / 58N / 23N | No (Pay attention to application) |
Lead Angle 16.2° / 9.3:1 / Engineering Plastic Gears |
50mm (53mm*) | 17Lf-17F-50 | |||||
87mm (90mm*) | 17Lf-17F-87 | |||||
20N | 27mm (30mm*) | 17Lf-20F-27 | 20N / 117mm/s | Lead Angle 22.2° / 9.3:1 / Engineering Plastic Gears | ||
27N | 37mm (40mm*) | 17Lf-27F-37 | 27N / 82mm/s | 96N / 68N / 27N | Lead Angle 12.3°/ 9.3:1 / Engineering Plastic Gears | |
50mm (53mm*) | 17Lf-27F-50 | |||||
87mm (90mm*) | 17Lf-27F-87 | |||||
35N | 27mm (30mm*) | 17Lf-35F-27 | 35N / 90mm/s | Lead Angle 17° / 9.3:1 / Engineering Plastic Gears | ||
50N | 37mm (40mm*) | 17Lf-50F-37 | 50N / 28mm/s | 182N / 129N / 50N | Yes (Applicable) |
Lead Angle 4.16° / 9.3:1 / Engineering Plastic Gears |
50mm (53mm*) | 17Lf-50F-50 | |||||
87mm (90mm*) | 17Lf-50F-87 | |||||
70N | 27mm (30mm*) | 17Lf-70F-27 | 70N / 32mm/s | Lead Angle 5.82° / 9.3:1 / Engineering Plastic Gears |
(*): Maximum stroke length when adjusting long stroke limit through Total Manager software
17Lf Servo Series Common Specifications
Repeatability | Stroke | Unidirectional | |||
27mm / 37mm | 30μm(0.03mm) | ||||
50mm | 40μm(0.04mm) | ||||
87mm | 50μm(0.05mm) | ||||
Mechanical Backlash | 0.03mm(30μm) | ||||
Rod Type | Metal Alloy Rod | ||||
Motor Type | Coreless DC (17mm diameter) | ||||
Rated Voltage | 12VDC | ||||
Motor Watt | 3.8W | ||||
Recommended Duty Cycle | At Rated Load | At Max Applicable Load | |||
Max 50% | Max 20% | ||||
Current Accuracy | ±15%at Over 50mA | ||||
Position Sensor | 10KΩlinear Potentiometer | ||||
Input Voltage Range | 7 ~13V (Rated 12VDC) | ||||
Current Consumption | Idle | at Rated Load | Stall | ||
Default Setting | MAX | ||||
Under 30mA | 400mA | 800mA | 1600mA | ||
Audible Noise | Approx. 50db at 1m | ||||
LED Indication | Two Errors Indications (Input voltage, Overload) | ||||
Communication Method / Protocol | RS-485 / MODBUS RTU (IR Open protocol is not supported) | ||||
Pulse Signal / Pulse Range | PWM mode to be added later by I/O Port | ||||
Ingress Protection | IP-54(Dust & Water Tight) | ||||
Dimension(LxHxW) / Wight (Dimension excluding the rod-end tip and hinge) |
27mm | 57.5x40.6x23mm / 65.5g | |||
40mm | 86.8x57.9x23mm / 113.5g | ||||
53mm | 111.5x57.9x23mm / 140g | ||||
87mm | 151.5x57.9x23mm / 188g | ||||
Operating Temperature | -10℃~ 60℃ | ||||
Wire Harness | Comm./Power | RS-485 Molex to Molex Type(Molex 510650400, 4pins) / 200mm length, 0.08×60(22AWG) | |||
I/O Port | I/O Port Wire harness : Molex 510210500, 5pins / 200mm length, 0.16 x 7 (26AWG) |
Dimension
Standard Accessories
PC Software MightyZAP Manager
- Setting for various operation parameters & memory parameters
- Baud rate, ID, Delay, Stroke limit, Compliance margin setting
- Goal Speed, Goal Position, Goal Current, LED Alarm, Shutdown setting
- Acceleration / Deceleration Setting - Simple Motion Test
- System reset and Firmware update
- Motor Operating Rate, Voltage, Temperature, Position, Current real time monitoring
- Need optional PC USB Interface “IR-USB02” (Sold separately)
- Windows compatible mightyZAP manager PC software enables users to set various parameters & test motions. (Able to downloaded from our website for free)
- (PC Software will be updated from time to time, so it is recommended for the user to download and update PC software properl