[ 12D NANO Limit Switch Series ] - 15mm(0.59in) stroke, Corerd Motor

[ 12D NANO Limit Switch Series ] - 15mm(0.59in) stroke, Corerd Motor

7N / 30mm/s
$55.00 USD
$55.00 USD
Skip to product information
[ 12D NANO Limit Switch Series ] - 15mm(0.59in) stroke, Corerd Motor
  • [ 12D NANO Limit Switch Series ] - 15mm(0.59in) stroke, Corerd Motor
[ 12D NANO Limit Switch Series ] - 15mm(0.59in) stroke, Corerd Motor

Home > Products > 12D NANO Limit Switch Series > [ 12D NANO Limit Switch Series ] - 15mm(0.59in) stroke, Corerd Motor

12D NANO Limit Switch Series

[ 12D NANO Limit Switch Series ] - 15mm(0.59in) stroke, Corerd Motor

$55.00 USD
$55.00 USD

12D NANO Limit Switch Series Digital Archive

User Manual Drawings Data sheet

* If you click the button above, the new window will open and move to the digital archive page of our headquarter's website. Please make sure to return to the current website to complete the product purchase after referring to the data.

Features

  • Mini/Nano Size

  • Built-in Limit Switches

  • Max 22mm Stroke (12L / 12D MINI)

  • Max 15mm Stroke(12D NANO)

  • Heavy Duty, Durable 12V Coreless Moter Lineup (12L MINI)

  • Economical 12V / 7.4V Cored Motor Lineup (12D MINI & NANO)

12D NANO Limit Switch Specifications

Rated Load Stroke Input Volt. : 12V Rated Load / Max Speed (No Load) Mechanical Self Lock (Z Axis Use) Gear Ratio / Gear Type Motor Type
/ Watt
7N 15mm 12D-7S-15 7N / 30mm/s No (Pay attention
to application)		 30:1 / 3 line/ Engineering Plastic gears Brushed Cored DC Motor / 0.26W
12N 12D-12S-15 12N / 11.25mm/s Yes (Applicable) 30:1 / 1 line / Engineering Plastic gears

(*): Maximum stroke length when adjusting long stroke limit through Total Manager software

12D NANO Limit Switch Series Common Specifications

Stroke 15mm (± 1mm)
Repeatability (Unidirectional) ± 500μm(± 0.5mm)
Mechanical Backlash 400μm (0.4mm)
Rod Type Engineering Plastic Rod
Motor Type Brushed Cored DC Motor
Motor Watt 0.26W
Recommended Duty Cycle 20%
Input Voltage Range 7 ~ 13V (Rated 12V)
Current Consumption Input Voltage Idle Rated Max (Stall)
0mA 20mA 40mA 200mA
Audible Noise Approx. 50db at 1m
Ingress Protection IP-54 (Dust & Water Tight)
Size / Weight 32(L)x21.5(W)x12(H)mm/ 17g
Operating Temperature -10℃ ~ 60℃
Wire Harness Flexible PCB 5P
Standard Accessories 2 x U-Type Bracket / 2 x D3x8.6 Hinge / 4 x ID1.5xOD4xT0.4 Snap Ring-E / 2 x M3x8 Screw / 1 x FPCB Connector

(*): Maximum stroke length when adjusting long stroke limit through Total Manager software

Dimensions

Coreless Motor / 22mm Stroke
[UNIT : mm]
INDEX DIMENSION
L1 (MIN POSITION) 7 ± 0.8
L2 (MAX POSITION) 15 ± 1
L3 (STROKE) 4 ± 0.8

12D NANO Limit Switch Series Standard Accessories

  • U-Type Bracket 2pcs

  • Hinge-Pin D3 x 8.6 2pc

  • E-Ring ID 1.5 x OD4 xT0.4 4pcs

  • M3 x 8 Screw 2pcs

  • F-PCB Connector 1pc

Example for Application of Standard Accessories

[Rod-End Side]

1 Insert 4 M3x8 screw into the middle hole of U-type Bracket and fix the screw to the user’s device. Align the center of the two side holes of U-type Bracket and the side hole of Rod, then insert 2 Hinge-pin. After the Hinge-pin protrudes from both ends of U-Bracket, fix the pin by two 3 E-rings.

[Rear Case Side]

1 Insert  4 M3x8 screw into the middle hole of U-type Bracket and fix the screw to the user’s device. Align the center of the two side holes of U-type Bracket and the side hole of Hinge on the rear case, then insert  2 Hinge-pin. After the Hinge-pin protrudes from both ends of U-Bracket, fix the pin by two  3 E-rings.
* Cuation : Either Rod or Rear case hinge must be mechanically unconstrained and must be structured to move freely along with the actuator.

[F-PCB]

Insert the Terminal of F-PCB so that it can make contact with the  5 connector pin. (See the picture below)
if inserted in the opposite direction, the actuator will not work.

PC Software MightyZAP Manager

· Setting for various operation parameters & memory parameters
- Baud rate, ID, Delay, Stroke limit, Compliance margin setting
- Goal Speed, Goal Position, Goal Current, LED Alarm, Shutdown setting
- Acceleration / Deceleration Setting

· Simple Motion Test

· System reset and Firmware update

· Motor Operating Rate, Voltage, Temperature, Position, Current real time monitoring

· Need optional PC USB Interface “IR-USB02” (Sold separately)

· Windows compatible mightyZAP manager PC software enables users to set various parameters & test motions. (Able to downloaded from our website for free)

· PC Software will be updated from time to time, so it is recommended for the user to download and update PC software properl

more from this collection