Cart 0
Cart 0
[ 17Lf Servo Series ] - 87mm(3.42in) stroke

[ 17Lf Servo Series ] - 87mm(3.42in) stroke

$254.00 $0.00

17Lf Servo Series Features

  • Compact size with built-in drive, position sensor, DC motor and gear box
  • Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor
  • Position, current and speed control along with position & current feedback
  • Easy digital I/O control through expansion I/O port (No coding)
  • Action feature which enables user's motion save & run
  • 27/37/50/87mm(*) stroke option
    (*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software.
  • Rated load of 17N~70N depending on the lead angle for each stroke
    - Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed.
  • RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided)

 

17Lf Servo Series Specifications


Rated
Load		 Stroke Communication Rated Load /
Max Speed(No Load)		 Stall Force at Current
(1.6A / 800mA / 200mA)		 Mechanical
Self Lock
(Z Axis Use)		 Lead Screw / Gear Ratio / Gear Type
RS-485
17N 37mm (40mm*) 17Lf-17F-37 17N / 105mm/s 90N / 58N / 23N No
(Pay attention to application)		 Lead Angle 16.2° / 9.3:1 / Engineering Plastic Gears
50mm (53mm*) 17Lf-17F-50
87mm (90mm*) 17Lf-17F-87
20N 27mm (30mm*) 17Lf-20F-27 20N / 117mm/s Lead Angle 22.2° / 9.3:1 / Engineering Plastic Gears
27N 37mm (40mm*) 17Lf-27F-37 27N / 82mm/s 96N / 68N / 27N Lead Angle 12.3°/ 9.3:1 / Engineering Plastic Gears
50mm (53mm*) 17Lf-27F-50
87mm (90mm*) 17Lf-27F-87
35N 27mm (30mm*) 17Lf-35F-27 35N / 90mm/s Lead Angle 17° / 9.3:1 / Engineering Plastic Gears
50N 37mm (40mm*) 17Lf-50F-37 50N / 28mm/s 　182N / 129N / 50N Yes
(Applicable)		 Lead Angle 4.16° / 9.3:1 / Engineering Plastic Gears
50mm (53mm*) 17Lf-50F-50
87mm (90mm*) 17Lf-50F-87
70N 27mm  (30mm*) 17Lf-70F-27 70N / 32mm/s Lead Angle 5.82° / 9.3:1 / Engineering Plastic Gears


(*): Maximum stroke length when adjusting long stroke limit through Total Manager software




17Lf Servo Series Common Specifications
Repeatability Stroke Unidirectional
27mm / 37mm 30μm(0.03mm)
50mm 40μm(0.04mm)
87mm 50μm(0.05mm)
Mechanical Backlash 0.03mm(30μm)
Rod Type 　Metal Alloy Rod
Motor Type Coreless DC (17mm diameter)
Rated Voltage 12VDC
Motor Watt 3.8W
Recommended Duty Cycle At Rated Load At Max Applicable Load
Max 50% Max 20%
Current Accuracy ±15%at Over 50mA
Position Sensor 10KΩlinear Potentiometer
Input Voltage Range 7 ~13V (Rated 12VDC)
Current Consumption Idle at Rated Load Stall
Default Setting MAX
Under 30mA  400mA 800mA 1600mA
Audible Noise Approx. 50db at 1m
LED Indication Two Errors Indications (Input voltage, Overload)
Communication Method / Protocol RS-485 / MODBUS RTU (IR Open protocol is not supported)
Pulse Signal / Pulse Range PWM mode to be added later by I/O Port
Ingress Protection IP-54(Dust & Water Tight)
Dimension(LxHxW) / Wight
(Dimension excluding the rod-end tip and hinge)		 27mm 57.5x40.6x23mm / 65.5g
40mm 86.8x57.9x23mm / 113.5g
53mm 111.5x57.9x23mm / 140g
87mm 151.5x57.9x23mm / 188g
Operating Temperature -10℃~ 60℃
Wire Harness Comm./Power RS-485 Molex to Molex Type(Molex 510650400, 4pins) / 200mm length, 0.08×60(22AWG)
I/O Port I/O Port Wire harness : Molex 510210500, 5pins / 200mm length, 0.16 x 7 (26AWG)



Dimension


Standard Accessories


PC Software MightyZAP Manager

  • Setting for various operation parameters & memory parameters
    - Baud rate, ID, Delay, Stroke limit, Compliance margin setting
    - Goal Speed, Goal Position, Goal Current, LED Alarm, Shutdown setting
    - Acceleration / Deceleration Setting
  • Simple Motion Test
  • System reset and Firmware update
  • Motor Operating Rate, Voltage, Temperature, Position, Current real time monitoring
  • Need optional PC USB Interface “IR-USB02” (Sold separately)
  • Windows compatible mightyZAP manager PC software enables users to set various parameters & test motions. (Able to downloaded from our website for free)
  • (PC Software will be updated from time to time, so it is recommended for the user to download and update PC software properl


Share this Product

More from this collection