Corporate Benefits (before)

Corporate Benefit Program

1. Discount per Order q’ty (Max 40% Off)

  • Discount starting from 5% for 50pcs (model mix available)
  • Discount available for actuators only (accessories are excluded)
  • Bulk packaging

2. If we exchange business card…

  • 10% first sample discount
  • Technical assistance for mightyZAP
  • To be a subscriber for News letter for new product and new updated features.
  • If you wish, we gladly help you to choose the most proper model for your application.
  • Too many model lineup? If you wish, we gladly help you to choose the most proper model for your application.

3. Discount per Order q’ty (Max 40% Off)

  • If necessary, we can customize actuator according to customer’s requirement.
  • Please refer to the attached “Customization program”.

4. Do a testing for your application

  • Based on information from you, we can make same test condition such as durability test and share its result with you.
  • The cost will be prepaid for the actual cost.
  • Depending on our schedule or equipment limitation, we may not meet your requirements.

Customization Program

In case that our standard actuator does not meet your requirement, we can customize actuator for you. Please feel free to contact us to inquire customization.

Simple Customization

Minimum Q’ty: 100pcs

1. Connector :

  • Applying customized connectors on the opposite side of actuator

2. Wire :

  • Customize wire length, thickness, color, wire shield, etc.

3. Parameter :

  • Parameter changes using Servo Manager Software from factory. (Ex -Overload Protection Off, Stroke change from 27mm to 30mm, Stroke limit change, etc)

※ According to special wire and connector’s MOQ, prepayment for the actual cost of those wires and connectors may be required.

Special Customization

Minimum Q’ty: 100pcs

※ For some cases, development cost or prepayment for special parts/material may be required.

1. Grease :

  • Change to special grease or spread volume change : for durability, we need to test it based on request.
    ※ For some cases, development cost or prepayment for special parts/material may be required.

2. Rod End Tip / Rod :

  • Special shape rod end tip
  • Rod material change
  • Drawing is required.

3. Firmware :

  • Add special feature or Control characteristic change including PID value change
  • Ex) We are applying slightly different PID value for certain application according to customer request. 

4. Connector Outlet(MOQ 200pcs) :

  • Original :
  • Rubber Cap
    - Applying rubber cap without connector for water/dust tight condition.
  • Remove Connector Outlet :
    - Remove connector outlet for space constraint.
    - Need to make a new PC board and prepayment(U$5,000) for the 500pcs PCB will be required.
    - Actuator can be shipped partially(more than 50pcs)
    - Prepaid amount will be deducted from the actuator cost.

5. Metal Parts(Center/Output gears, Rod-insert) :

  • The standard engineering plastic center gear, output gear and rod insert have been developed through intensive test considering for durability, impact resistance and lubricity.
  • Under special condition, however, we can apply metal parts for those plastic parts for better impact resistance.
  • If we apply metal parts, lifecycle of actuator will be shortened due to gear wearing (1/5 of engineering plastic gear) and mechanical play can be made faster.
  • Therefore, metal parts can be applied for the application whose operation frequency is not that high while they need stronger impact resistance.
  • Metal center gear can be applied to all stroke lineup except for 27mm stroke version. 

6. Bottom Case :



                                                          Before                                                                                                                       After
  • Bottom case can be changed as above according to customer’s request. (2.4mm shorter)
  • Change at customer’s side is not permitted. (Change at factory only)

7. Circuitry :

  • PCB change : As mentioned before, prepayment(U$5,000) for the 500pcs PCB will be required. Actuator can be shipped partially(more than 50pcs) and prepaid amount will be deducted from the actuator cost.
  • Special motor : (Voltage/ Force/lifespan) : Due to MOQ of DC motor, prepayment is required for DC motor cost.  Prepaid amount will be deducted from the actuator cost. 

Complicated Level Customization

Minimum Q’ty : Please consult

 

  • New mold or Mold change (Redesign shape body case)
  • Considerable development cost will be required due to long-term R&D period and resource.
  • There is a possibility that the proposal will not be adopted due to our workforce status or development plan priorities.